Odyssey EX V6-3.5L (1999)
Axle Shaft: Service and Repair
Intermediate Shaft
Intermediate Shaft Removal
1. Drain the ATF.
2. Remove the left driveshaft.
3. Remove the three dowel bolts (A).
4. Remove the intermediate shaft (B) from the differential. Hold the intermediate shaft horizontal until it is clear of the differential to prevent damage
to the differential oil seal.
Intermediate Shaft Disassembly
Special Tools Required
-
Driver 07749-0010000
-
Support base attachment 07LAF-SM40300
-
Support base 07965-SD90100
-
Attachment, 42 x 47 mm 07746-0010300
1. Remove the heat shield (A) and intermediate shaft outer seal (B) from the bearing support (C).
2. Remove the set ring (D) and the external circlip (E).
3. Press the intermediate shaft (A) out of the intermediate shaft bearing (B) using the special tools and a press. Be careful not to damage the metal
rings (C) on the intermediate shaft during disassembly.