Odyssey EX V6-3.5L (1999)
6. Pack the interior of the outer seal (A). Install the outer seal into the bearing support (B) using the special tools and a press.
7. Install the heat shield onto the bearing support.
Intermediate Shaft Installation
1. Clean the areas where the intermediate shaft (A) contacts the transmission (differential) thoroughly with solvent or carburetor cleaner, and dry with
compressed air. Insert the intermediate shaft assembly into the differential. Hold the intermediate shaft horizontal to prevent damage to the
differential oil seal (B).
2. Install the three dowel bolts (B).
3. Install the right driveshaft.
4. Refill the ATF.
