Odyssey EX V6-3.5L (1999)
14. With a sponge, apply a light coat of glass primer along the edge of the rear window (A) lower rubber dam (B) as shown, then lightly wipe it off
with gauze or cheesecloth:
-
With the printed dots (C) on the rear window as a guide, apply the glass primer to both side portions of the rear window.
-
Do not apply body primer to the rear window, and do not get tailgate and glass primer sponges mixed up.
-
Never touch the primed surfaces with your hands. If you do, the adhesive may not bond to the rear window properly, causing a leak after the
rear window is installed.
-
Keep water, dust, and abrasive materials away from the primed surface.
15. With a sponge, apply a light coat of body primer to the original adhesive remaining around the rear window opening flange. Let the body primer
dry for at least 10 minutes:
-
Do not apply glass primer to the body, and be careful not to mix up glass and body primer sponges.
-
Never touch the primed surfaces with your hands.
