Odyssey EX V6-3.5L (1999)
13. Attach the rubber dam (A) with adhesive tape (NITTO 501M, or equivalent) to the inside surface of the glass (B) as shown. Be careful not to
touch the glass where adhesive will be applied.
14. With a sponge, apply a light coat of glass primer along the edge of the glass (A) and molding (B) as shown, then lightly wipe it off with gauze or
cheesecloth:
-
Do not apply body primer to the sliding door glass, and do not get body and glass primer sponges mixed up.
-
Never touch the primed surfaces with your hands. If you do, the adhesive may not bond to the sliding door glass properly, causing a leak after
the sliding door glass is installed.
-
Keep water, dust, and abrasive materials away from the primed surface.
