Odyssey LX V6-3.5L (2000)
Sliding Door Window Glass: Service and Repair
Sliding Door Glass Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Use seat covers to avoid damaging any surfaces.
-
Wear eye protection while cutting the glass adhesive with piano wire.
1. Remove the sliding door panel.
2. Remove the upper seal (A) and molding (B) from the edge of the glass (C). If necessary, cut the upper seal and molding with a utility knife.
3. Apply protective tape (A) along the inside and outside edges of the sliding door as shown. Using an awl, make a hole through the adhesive (B)
from inside the vehicle. Push a piece of piano wire (C) through the hole, and wrap each end around a piece of wood.
