Odyssey LX V6-3.5L (2000)
Fuel Door Release Cable: Service and Repair
Fuel Fill Door Opener Cable Replacement
SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before performing repairs or service.
1. Remove these items:
-
Front door sill trim, left side
-
Sliding door sill trim, left side
-
Rear side trim panel
-
Third row seat belt retractor
-
Quarter plastic cover
2. Pull the carpet back as necessary.
3. Disconnect the fuel fill door opener cable (A) from the opener (B)
4. Release the opener cable from the clips (C, E, F) and remove the cable cushion (D), then remove the fuel fill door latch (G) from the body.
5. Install the cable in the reverse order of removal, and replace any damaged clips.
6. Check the operation of the sliding door; verify that the left sliding door locks when the fuel filler door release is pulled.