Odyssey LX V6-3.5L (2000)
4. With navigation system: Remove the rear license molding (A).
1. Pull out the molding to detach the clips (B) from the rear license trim (C).
2. Remove the screws (D), then remove the rear camera unit (E) from the rear license trim.
3. Disconnect the rear license light connectors (F).
5. Install the trim in the reverse order of removal, and note these items:
-
Replace any damaged clips.
-
Make sure the rear license light subharness connector is plugged in properly.
-
Make sure the harness grommet is installed securely.
-
Push the clips into place securely.
