Odyssey LX V6-3.5L (2000)
Brake Pad: Service and Repair
Front Brake Pads Inspection and Replacement
CAUTION: Frequent inhalation of brake pad dust, regardless of material composition, could be hazardous to your health.
-
Avoid breathing dust particles
-
Never use an air hose or brush to clean brake assemblies. Use an OSHA-approved vacuum cleaner.
1. Loosen the front wheel nuts slightly. Raise the front of the vehicle, and make sure it is securely supported. Remove the front wheels.
2. Remove the brake hose mounting bolt (A) from the knuckle.
3. Hold the caliper pin with a wrench, being careful not to damage the pin boot. Remove the caliper bolt (B) with another wrench.
4. Pivot the caliper (C) up out of the way. Check the hoses and pin boots for damage and deterioration.
5. Remove the pad shims (A), pad retainers (B), and pads (C). The '99-01 models have two pairs of pad shims. The '02 model has one pair of the pad
shims.
