Odyssey LX V6-3.5L (2000)
5. If eight numbers (1 to 8) are printed around the outside of the filter, use the following procedure to tighten the filter.
-
Spin the filter on until its seal lightly seats against the block, and note which number is at the bottom.
-
Tighten the filter by turning it clockwise seven numbers from the one you noted. For example, if number 2 is at the bottom when the seal is
lightly seated, tighten the filter until the number 1 comes around to the bottom.
6. After installation, fill the engine with oil up to the specified level, run the engine for more than 3 minutes, then check for oil leakage.