Odyssey LX V6-3.5L (2000)
10. Install the intake air duct (A), then install the vacuum hose(s) (B) and breather pipe (C).
11. Install the EVAP canister hose (D) ('99-01 models) or vacuum hose (D) ('02 model).
12. Install the ignition coil cover(s) (A) and intake manifold cover (B).
13. Clean up any spilled engine coolant.
14. After installation, check that all tubes, hoses and connectors are installed correctly.
15. Refill the radiator with engine coolant, and bleed air from the cooling system with the heater valve open.
