honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Air Mix Control Motor Test|Page 6937 > < Air Mix Control Motor Test|Page 6935
Page 3
background image

Do the rear mode control linkage and doors move smoothly?

YES - Replace the rear mode control motor.

NO - Repair the rear mode control linkage or doors.

11. Remove the rear mode control motor relay, and test it.

Is the relay OK?

YES - Go to step 12.

NO - Replace the rear mode control motor relay.

12. Turn the ignition switch ON (II).

13. Measure the voltage between the No.5 terminal of the rear mode control motor relay 5P socket and body ground.

Is there battery voltage?

YES - Go to step 14.

NO - Repair open in the wire between the No.3 fuse in the driver's under-dash fuse/relay box and the rear mode control motor relay.

14. Turn the ignition switch OFF.

15. Check for continuity between the No.3 and No.4 terminals of the rear mode control motor 7P connector and body ground individually.

Is there continuity?

YES - Repair any short to body ground in the wire(s) between the rear mode control motor and the rear mode control motor relay.

NO - Go to step 16.

Air Mix Control Motor Test|Page 6937 > < Air Mix Control Motor Test|Page 6935