honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Blower Motor Circuit Troubleshooting|Page 7038 > < Blower Motor Circuit Troubleshooting|Page 7036
Page 3
background image

13. Disconnect the rear heater-A/C main switch 10P connector.

14. Check for continuity between the No.8 terminal of the rear heater-A/C main switch 10P connector and body ground.

Is there continuity?

YES - Test the rear heater-A/C main switch and the rear heater-A/C passenger's control panel.

NO - Check for an open in the wire between the rear heater-A/C main switch and body ground. If the wire is OK, check for poor ground at G401.

15. Disconnect the jumper wire.
16. Disconnect the rear blower motor 2P connector.

17. Measure the voltage between the No.1 terminal of the rear blower motor 2P connector and body ground.

Is there battery voltage?

YES - Replace the rear blower motor.

NO - Repair open in the wire between the No.60 fuse in the multi-fuse/relay box ('99-02 models), or the No.80 fuse in the under-hood sub fuse
box ('03 model) and the rear blower motor.

Blower Motor Circuit Troubleshooting|Page 7038 > < Blower Motor Circuit Troubleshooting|Page 7036