honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Blower Motor Circuit Troubleshooting|Page 7047 > < Blower Motor Circuit Troubleshooting|Page 7045
Page 1
background image

Blower Motor: Testing and Inspection
Rear Blower Motor Middle Speed Circuit Troubleshooting

Rear Blower Motor Middle Speed Circuit Troubleshooting

1. Remove the rear blower unit.
2. Remove the rear blower motor middle relay, and test it.

Is the relay OK?

YES - Go to step 3.

NO - Replace the rear blower motor middle relay.

3. Disconnect the rear blower resistor.

4. Measure the resistance between the No.1 and No.4 terminals of the rear blower resistor.

Is there about 1.4 Ohm?

YES - Go to step 5.

NO - Replace the rear blower resistor.

5. Check for continuity between the No.4 terminal of the rear blower resistor 5P connector and the No.2 terminal of the rear blower motor middle

relay 5P socket.

Is there continuity?

YES - Go to step 6.

NO - Repair open in the wire between the rear blower resistor and the rear blower motor middle relay.

Blower Motor Circuit Troubleshooting|Page 7047 > < Blower Motor Circuit Troubleshooting|Page 7045