Odyssey LX V6-3.5L (2000)
1.
Remove the wiper arm cap, the nut, and the wiper arm. Discard the nut.
2.
Using a wire brush, remove any wiper arm material from the splines of the wiper motor shaft.
3.
Install the rear wiper arm onto the motor shaft in the park position.
4.
Install the new flange nut, and torque the nut to 11.7 N.m (8.6 lb-ft).
5.
Install the wiper arm cap.
6.
Wet the rear window, and turn on the rear wiper to make sure it works properly.
Disclaimer