Odyssey LX V6-3.5L (2000)
-
If any test indicates a problem, find and correct the cause, then recheck the system. If all the input tests prove OK, go to step 5.
5. Reconnect the driver's multiplex control unit to the fuse/relay box, and perform the following input tests at the appropriate connectors on the back
of the fuse/relay box.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 6.
Multiplex Control Unit, Passenger's:
6. Remove the passenger's unit from the passenger's under-dash fuse/relay box, and disconnect its connector.
7. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 8.
8. With the control unit still disconnected, make these input tests at the connector and fuse/relay box socket.
-
If any test indicates a problem, find and correct the cause, then recheck the system. If all the input tests prove OK, go to step 9.