honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

All Technical Service Bulletins for EGR Valve: > < Emissions - Hesitation/Surge Between 30 & 60 Mph|Page 4168
Page 8
background image

15.

Select the Line Graph button.

^

If the EGR LIFT graph follows the EGR L COMMAND graph, the EGR valve is OK. Troubleshoot other causes for the symptom.

^

If the EGR LIFT graph is different from the EGR L COMMAND graph, the EGR valve is bad. Go to REPAIR PROCEDURE.

REPAIR PROCEDURE

1.

Remove the intake manifold cover.

2.

Disconnect the EGR valve connector.

3.

Remove the EGR valve and gasket.

4.

Install the new gasket and EGR valve. Torque the nuts to 22 N.m (16 lb-ft). Reconnect the EGR valve connector, and install the intake manifold
cover.

5.

Connect the HDS to the vehicle's DLC, and clear any stored codes.

Disclaimer

All Technical Service Bulletins for EGR Valve: > < Emissions - Hesitation/Surge Between 30 & 60 Mph|Page 4168