Odyssey LX V6-3.5L (2000)
3. Before connecting a new fuel tube/quick-connect fitting assembly (A), remove the old retainer from the mating pipe.
4. Align the quick-connect fittings with the pipe (A), and align the retainer (B) locking pawls with the connector (C) grooves. Then press the
quick-connect fittings onto the pipe until both retainer pawls lock with a clicking sound.
NOTE: If it is hard to connect, put a small amount of new engine oil on the pipe end.
5. Make sure the connection is secure and that the pawls are firmly locked into place; check visually and by pulling the connector.
