Odyssey LX V6-3.5L (2000)
12. Check for continuity between PSP switch 2P connector No.2 terminal and body ground.
Is there continuity?
YES - Repair open in the wire between the PSP switch and PCM (A26).
NO - Repair open in the wire between the PSP switch and G201.
13. Turn the ignition switch OFF.
14. Disconnect the PSP switch 2P connector.
15. Turn the ignition switch ON (II).
16. Measure voltage between PCM connector terminals A26 and B20.
Is there battery voltage?
YES - Replace the PSP switch.
NO - Go to step 17.
17. Turn the ignition switch OFF.
18. Disconnect the negative cable from the battery.
19. Disconnect PCM connector A (32P).
20. Check for continuity between body ground and PCM connector terminal A26.
Is there continuity?
YES - Repair short in the wire between the PCM (A26) and the PSP switch.
