Odyssey LX V6-3.5L (2000)
Washer Fluid Level Switch: Testing and Inspection
Washer Fluid Level Switch Test - Canada
1. Remove the right inner fender.
2. Disconnect the 2P connector (A) from the washer level switch.
3. Remove the washer fluid level switch from the washer reservoir.
NOTE: Fluid may flow out of the opening.
4. Check for continuity between the No.1 and No.2 terminals in each float position (B).
-
There should be continuity when the float is down.
-
There should be no continuity when the float is up.
5. If the continuity is not as specified, replace the switch.