Odyssey LX V6-3.5L (2000)
Starter Solenoid: Testing and Inspection
Starter Solenoid Test
1. Disconnect the starter cable, BLK/WHT wire and starter motor wire.
2. Check the hold-in coil for continuity between the S terminal and the armature housing (ground). There should be continuity.
-
If there is continuity, go to step 3.
-
If there is no continuity, replace the solenoid
3. Check the pull-in coil for continuity between the S terminal and M terminal. There should be continuity.
-
If there is continuity, the solenoid is OK.
-
If there is no continuity, replace the solenoid.