Odyssey LX V6-3.5L (2000)
Heat the undercoat at the weld areas of the wheelhouse and front side frame with a gas torch, and peel off the undercoat with a metal spatula.
4. Replace the front wheelhouse
-
Center punch around the spot weld imprints on the front side frame and damper housing.
-
Drill holes in the center punched areas using a spot cutter.
-
Using a chisel, pry off the welded flange.
-
Level and finish the burrs left on the welding surfaces with a sander.
5. Check the damper housing for position and damage.
If necessary, replace the damper housing.