Odyssey LX V6-3.5L (2000)
7. Wrap the splines on the driveshaft with vinyl tape (A) to prevent damage to the boot.
8. Remove the boot band and the inboard boot. Take care not to damage the boot.
9. Remove the vinyl tape.
Outboard Joint Side:
1. Lift up the three tabs (A) with a screwdriver, then remove the boot bands (B). Take care not to damage the boot.
2. Slide the outboard boot (A) to the inboard joint side. Take care not to damage the boot.
3. Wipe off the grease to expose the driveshaft and the outboard joint inner race.
