Passport 2WD L4-2559cc 2.6L SOHC (4ZE1) (1994)
10. Crankshaft pulley fixing bolt
-
Use special tool to remove the pulley fixing bolt, Flywheel holder: J-38674
11. Crankshaft pulley
12. Timing belt cover
13. Timing belt
-
Use a screwdriver or a pair of pliers to remove the tension spring and remove the timing belt.
INSPECTION AND REPAIR
Timing Belt Handling Precautions:
1. Do not bend the belt to a radius of less than 20 mm (0.79 in.). Do not twist or bend the belt. Doing so wilt damage the glass fiber imbedded in the
belt. Timing belt precision will be adversely affected.
2. Do not store the belt in direct sunlight or in an area where it will be exposed to high temperatures.
3. Do not allow the stored belt to become dirty.
4. Do not use sharp metal tools to stretch or force the belt into position during installation.
Timing Belt Inspection:
1. Replace the belt if cracks are found in the side and rear.
2. Replace the belt if the side faces are excessively worn. Check also for manufacturing defects, rounded belt edges, and loose glass fiber.