honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Fuel Line <--> [Fuel Supply Line]|Testing and Inspection|Page 2519 > < Fuel Line <--> [Fuel Return Line]|Service and Repair
Page 1
background image

Fuel Line: Testing and Inspection

The Fuel Tank, Cap and Lines should be inspected for road damage, which could cause leakage. Inspect Fuel Cap for correct sealing and
indications of physical damage. Replace any damaged or malfunctioning parts.

WARNING:  Before attempting service of any type on the Fuel System always: 
1. Remove Negative Battery Cable from Battery.
2. Place "No Smoking" signs near work area.
3. Be sure to have a dry chemical (Class B) fire extinguisher handy.
4. Wear safety glasses.
5. Siphon or pump Fuel into an explosion-proof container, to prevent the possibility of an explosion or fire
.

Make sure necessary adjustments, repairs or part replacements if wear, damage or other problems are discovered during inspection. Check to see
that the pipes are not cracked and that there are not leaks. A pipe must be replaced if either of these conditions are present.

Fuel Line <--> [Fuel Supply Line]|Testing and Inspection|Page 2519 > < Fuel Line <--> [Fuel Return Line]|Service and Repair