Passport 2WD V6-3.2L SOHC (6VD1) (1995)
3.
Remove both door panels.
4.
Remove the speaker boxes in both doors.
5.
Move the door, and look for harness damage where the door checker comes near the harness.
-
If the harness is damaged, go to step 6. Do the procedure on one side of the vehicle at a time, and use the opposite side as a reference for
harness routing, clip locations, and bolt locations.
-
If the harness is not damaged, go to step 22; do only steps 22, 23, 24, 31, 37, 38, and 39.
6.
Remove the door pull bracket and the plastic rain protector. If you damage the rain protector, replace it (see PARTS INFORMATION).