Passport 2WD V6-3.2L SOHC (6VD1) (1995)
Timing Belt: Service and Repair
1994-95 Models
REMOVAL STEPS
Preparation: Battery ground cable
1. Radiator upper fan shroud
-
Remove from radiator.
2. Cooling fan assembly
-
Remove four nuts, then the cooling fan assembly.
3. Power steering pump drive belt
4. Air Conditioning compressor drive belt
5. Generator drive belt
6. Fan pulley assembly
7. Crankshaft pulley assembly
-
Using special tool J-8614-O1, hold crankshaft pulley.
-
Remove center bolt, then the pulley.
8. Oil cooler hose
-
Remove two cooler hose bracket fixing bolts on the timing cover.
9. Timing belt cover
10. Pusher
CAUTION:
-
The pusher prevents air from entering the oil chamber. Its rod must always be facing upward.