Passport 2WD V6-3.2L SOHC (6VD1) (1995)
/Page-258001.png)
Fuel Pressure Release: Service and Repair
WARNING: To reduce the risk of fire and personal injury, it is necessary to relieve the Fuel System Pressure before Servicing Fuel System
Components. Unless this procedure is followed before servicing Fuel Lines or connections, Fuel spray could occur.
When repairs to the Fuel System has been completed, start Engine and check all connections that were loosened for possible leaks.
1. Remove Fuel Cap.
2. Remove Fuel Pump Relay from Underhood Relay Center.
3. Start Engine and allow to stall.
4. Crank Engine for an additional 30 seconds.
5. Remove Negative Battery Cable.
