Passport 2WD V6-3.2L SOHC (6VD1) (1995)
Idle Speed/Throttle Actuator - Electronic: Testing and Inspection
Cleaning, Inspection and Measurement Procedure
Cleaning and Inspection
-
Clean IAC Valve O-Ring sealing surface, Pintle Valve Seat and air passage.
-
Use Carburetor cleaner and a parts cleaning brush to remove carbon deposits.
NOTE: Do Not use a cleaner that contains methyl ethyl ketone. It is an extremely strong solvent, and not necessary for this type of deposit.
-
Shiny spots on the Pintle or seat are normal, and do not indicate misalignment or a bent Pintle Shaft.
-
If air passage has heavy deposits, remove Throttle Body for complete cleaning. Inspect IAC Valve O-Ring for cuts, cracks or distortion. Replace if
damaged.
CAUTION: If reinstalling a new IAC Valve, be sure to replace it with an identical part. IAC Valve Pintle shape and diameter are designed for the
specific application.