Passport 2WD V6-3.2L SOHC (6VD1) (1995)
/Page-1000012.png)
Ground
This ground symbol (dot and 3 lines) overlapping the component means the housing of the component is grounded to the car frame or to a metal part
connected to the frame.
Ground
This symbol represents the bus inside a ground connector. The dots represent tabs on the bus that the wire terminals connect to.
The ground symbol (large dot) is the connection between the bus and metal (grounded) part of the car.
Shielding
Shielding
This represents RFI (Radio Frequency Interference) shielding around a wire. The shielding is always connected to ground.
Splices
Splices
Splices are shown as a dot. Their location and the number of wires may vary depending on the harness manufacturer.
Switches
Switches
These switches move together; the broken straight line between them means they are mechanically connected.
Switches
