Passport 4WD V6-3.2L SOHC (6VD1) (1994)
(e) If clearance "t" is larger than snap ring groove, selected shims must be installed so that clearance "t" is 0 to 0.1 mm (0 to 0.0039 in)
Thickness shims; 0.2, 0.3, 0.5, 1.0 mm
(f) Remove special tool J-36836, leaving the inner cam in position.
5. Drive clutch assembly
-
Apply EP. multipurpose grease NLGI No.2 to the following portions.
(a) Axle shaft splines
Fig. 19 Application of drive clutch assembly lubricant (Part 1 of 2)
-
"A" groove and "B" portion