Passport 4WD V6-3.2L SOHC (6VD1) (1994)
19. Remove fuel rail mounting bolts, and remove rail assy complete with injectors.
NOTE:If an injector becomes separated from rail and remains in head, both injector O-ring seals and retainer clip must be replaced.
Fuel Rail
DISASSEMBLY
1. Remove pressure regulator mounting bolts and remove regulator.
Fuel Injector Retaining Clip Removal
2. Release injector retaining clips and remove injectors.
REASSEMBLY
1. Fuel rail
2. Multiport fuel injection injector assembly
^ Lubricate new injector 0-ring seal with engine oil, and install on injectors.
3. Injector retainer clip
4. Fuel pressure control valve assembly
5. Regulator attaching screw
INSTALLATION
To install, follow the removal steps in the