Passport 4WD V6-3.2L SOHC (6VD1) (1994)
Throttle Body: Testing and Inspection
Cleaning and Inspection
-
The Throttle bore and Valve deposits may be cleaned on-Vehicle, using Carburetor cleaner and a shop towel. Do not use a cleaner that contains
methyl ethyl ketone. It is an extremely strong solvent, and not necessary for this type of deposit.
-
The Throttle Body metal parts may be cleaned following disassembly, in a cold immersion-type cleaner.
CAUTION: The Throttle Position Sensor and Idle Air Control Valve should NOT come in contact with solvent or cleaner, as they may be
damaged.