Passport 4WD V6-3.2L SOHC (6VD1) (1994)
/Page-118001.png)
Manifold Pressure/Vacuum Sensor: Service and Repair
Removal
Preparation: Disconnect Battery Ground Cable.
1. Disconnect Vacuum Hose.
2. Disconnect Electrical Connector.
3. Remove Attaching Screws.
4. Remove Sensor.
Installation
To install, follow the removal steps in the reverse order.
4. Install Sensor.
3. Install Attaching Screws.
2. Connect Electrical Connector.
1. Connect Vacuum Hose.
