Passport 4WD V6-3.2L SOHC (6VD1) (1994)
11.
Place the alternator, pulley-side down, on the workbench. Remove the four through-bolts.
12.
Use two flat-tip screwdrivers to separate the front and rear housing assemblies.
13.
Place the rear housing assembly stator-side down on a padded surface. Remove the five stator mounting nuts.
14.
Remove the battery terminal nuts and insulator bushing.
^
4-cylinder: Lift the rubber boot on the B terminal. Remove the nut, lock washer, harness, and nut/insulator bushing.
^
V-6: Remove the nut and bushing.