Passport 4WD V6-3.2L SOHC (6VD1) (1994)
-
Install the outer race ; outer bearing by driving it into the hub.
Installer: J-29015
Grip: J-8092
11. Oil seal
-
Place the inner bearing onto the outer race in the hub and install a new oil seal and retaining ring.
-
Apply Multipurpose type grease NLGI No.2 or equivalent to the lip portion
Installer: J-36830
Grip: J-8092
9
Hub and disc assembly
(a) Put grease in the hub.
(b) Apply EP Multipurpose type grease NLGI No.2 or equivalent to the outer and inner bearing.
8. Hub nut