Passport EX 2WD V6-3.2L DOHC (6VD1) (1998)
Brake Rotor/Disc: Service and Repair
Removal and Installation
REMOVAL
1. Raise the vehicle and support the frame with suitable safety stands.
2. Remove wheel and tire assembly.
3. Remove the brake caliper.
4. Remove the hub assembly.
5. Remove tie-rod end from the knuckle.
6. Remove the speed sensor from the knuckle.
7. Loosen torsion bar by height control arm adjust bolt, then remove torsion bar.
8. Remove wheel speed sensor.
9. Remove back plate.