honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Valve Spring|Service and Repair > < Valve Spring|Specifications|Page 2189
Page 2
background image

3. Using a spring tester to compress the springs to the installed height, measure the compressed spring tension, and replace the springs if the

measured tension is below the specified limit.

At installed height: 35.0 mm (1.38 inch)
Standard: 196 N (44 lbs.)
Limit: Less than 181 N (41 lbs.)

Valve Spring|Service and Repair > < Valve Spring|Specifications|Page 2189