Passport EX 2WD V6-3.2L SOHC (6VD1) (1997)
/Page-1763004.png)
Torque to 8 Nm (70 lb.in.)
Installing Dust Seal
7. Dust seal.
-
Install the dust seal so that its groove faces downward.
Inserting Grommets
8. Grommet.
-
Lubricate the new grommets with clean rubber grease. Insert the grommets, with the flared side up, into the cylinder body.
9. Reservoir.
Screw
10. Screw.
Spec
Torque to 147 Nm (13 lb.in.)
11. Diaphragm.
12. Cover.
