Passport EX 2WD V6-3.2L SOHC (6VD1) (1997)
/Page-2290001.png)
Cruise Control Actuator: Service and Repair
REMOVAL
Preparation: Disconnect the battery ground cable.
1. Pump
^
Disconnect the connector.
^
Disconnect the vacuum hose.
^
Remove the pump fixing.
2. Actuator
^
Disconnect the inner cables of the actuator from the accelerator pedal.
^
Remove the outer cable clips.
^
Remove the actuator fixing nuts.
INSTALLATION
To install, follow the removal steps in the reverse order, noting the following point.
1. Take care not to bend the cable excessively.
