Passport EX 2WD V6-3.2L SOHC (6VD1) (1997)
/Page-586002.png)
-
Tighten bolt to 18 Nm (13 ft. lbs.).
5. Camshaft [16]
6. Cylinder head cover [15]
-
Tighten bolts to 8 Nm (69 inch lbs).
7. Timing belt [14]
8. Pusher [13]
-
Tighten bolt to 19 Nm (14 ft. lbs.).
9. Timing belt cover [12]
-
Tighten bolts to 18 Nm (13 ft. lbs.).
10. Oil cooler hose [11]
-
Tighten oil cooler hose bracket bolts to 18 Nm (13 ft. lbs.).
11. Crankshaft pulley assembly [10]
-
Use the special tool J-8614-01, or equivalent to hold the crankshaft pulley.
-
Tighten center bolt to 167 Nm (123 ft. lbs.).
12. Fan pulley assembly [9]
-
Tighten fixing bolt to 22 Nm (16 ft. lbs.).
13. Power steering pump [8]
-
Tighten pump fixing bolts to 56 Nm (41 ft. lbs.).
14. Generator drive belt [7]
-
Engage and adjust.
15. Air Conditioning compressor drive belt [6]
-
Engage and adjust.
16. Power steering pump drive belt [5]
-
Engage and adjust.
17. Fuel hoses [4]
-
Connect surely the hoses and install the bolts on the head cover.
18. Cooling fan assembly [3]
-
Tighten fixing bolts to 8 Nm (69 inch lbs.).
19. Radiator upper fan shroud [2]
20. Common chamber [1]
-
Tighten bolts and nuts to 24 Nm (17 ft. lbs.).
