Passport EX 2WD V6-3.2L SOHC (6VD1) (1997)
8. Fan control lever and/or Air Conditioning (A/C) switch connector
-
Pull the A/C switch out and disconnect the connectors.
9. Control lever assembly
-
Remove 4 fixing screws and disconnect the control cables at each unit side.
10. Cables
INSTALLATION
To install, follow the removal steps in the reverse order, noting the following points.
1. Adjust control cables
-
Air source control cable
1. Slide the control lever to the left.
2. Connect the control cable at the "CIRC" position and fix it.
-
Temperature control cable
1. Slide the control lever to the left.
2. Connect the control cable at the "COLD" position and fix it.
-
Air select control cable
1. Slide the control lever to the right.
2. Connect the control cable at the "DEFROST" position and fix it.