honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Oil Pressure Gauge > < Check Trans Indicator|Page 7841
Page 2
background image

NO:  Replace Powertrain Control Module (PCM). 

4. CASE: It is staying "OFF" with the ignition "ON" (engine "OFF").

a. This means that connection between the Lamp and the PCM is shorted to battery or opened.
b. Verify if instrument panel terminal 11 of connector 1-16 is shorted to battery or open.
c. Verify if the PCM connector J1 (RED) terminal A14 is shorted to battery or open.
d. Verify that the instrument panel terminal 14 of connector 1-16 is connected to Battery. If not check the Fuses and the connections (terminal 11

of connector H27) voltage.

e. IF problem solved: Go to  "CHECK TRANS" Indicator.

NO:  Replace Powertrain Control Module (PCM). 

Oil Pressure Gauge > < Check Trans Indicator|Page 7841