Passport EX 2WD V6-3.2L SOHC (6VD1) (1997)
/Page-2474001.png)
Dimmer Switch: Service and Repair
ILLUMINATION CONTROLLER
Preparation:
Disconnect the battery ground cable.
1. Instrument panel driver lower cover assembly
2. Illumination controller
^
Disconnect the connector.
^
To remove the controller, push the lock from the back side of the lower cover assembly.
DIODE
Preparation:
Disconnect the battery ground cable.
1. Diode
^
Remove by inserting a thin screwdriver in the gap between the diode (lock rib side) and the housing.
