Passport EX 2WD V6-3.2L SOHC (6VD1) (1997)
/Page-400002.png)
GENERATOR & FAN PULLEY
1
Drive belt Loosen generator fixing bolt and adjuster lock bolt.
2. Adjust bolt by turning adjust bolt. After installation, tighten lock bolt and fixing bolt to:
-
Tighten fixing bolt to 22 Nm (16 ft. lbs.).
-
Tighten lock bolt to 24 Nm (17 ft. lbs.).
A/C COMPRESSOR DRIVE BELT
-
Loosen lock bolt and adjust bolt by turning adjust bolt.
-
After installation tighten lock bolt to 50 Nm (37 ft. lbs.).
POWER STEERING OIL PUMP DRIVE BELT
-
Loosen lock bolt and adjust bolt by turning adjust bolt.
-
After installation tighten lock bolt to 46 Nm (30 ft. lbs.).
