Passport EX 2WD V6-3.2L SOHC (6VD1) (1997)
/Page-1279001.png)
Ignition Coil: Description and Operation
DESCRIPTION AND OPERATION
A separate coil-at-plug module is located at each spark plug. The coil-at-plug module is attached to the engine with two screws. It is installed
directly to the spark plug by an electrical contact inside a rubber boot. A three-way connector provides 12-volt primary supply from the 15-amp
ignition fuse, a ground-switching trigger line from the ignition control module, and a ground.
