Passport EX 2WD V6-3.2L SOHC (6VD1) (1997)
/Page-95001.png)
Power Mirror Switch: Service and Repair
REMOVAL
^
When there is no continuity at the terminal No. 5, 7, 8 and 10, it is considered that the circuit with terminal No. 1(B/W) is defective.
^
When there is no continuity at either one of the circuit No. 5, 7, 8, or 10, the motor in the mirror of the circuit or the circuit itself is defective.
Preparation:
Disconnect the battery ground cable.
1. Rear console
^
Remove four screws.
^
Disconnect the door mirror switch connector.
2. Door mirror switch
^
Release the locks of the switch.
INSTALLATION
To install, follow the removal steps in the reverse order.
