Passport EX 2WD V6-3.2L SOHC (6VD1) (1997)
/Page-1855001.png)
Starter Motor: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. Nut
Loosen the nut on terminal "M" of magnetic switch and disconnect the connector cable.
2. Bolt (2 pcs)
3. Magnetic switch
4. Dust cover
5. Torsion spring
^
Remove bolts, then the magnetic switch assembly.
^
Remove torsion spring from magnetic switch assembly.
6. Screw (2 pcs)
7. Through bolt (2 pcs)
8. Thrust washer
^
Remove screws and through bolts, then the rear cover.
9. Brush holder
