Passport EX 2WD V6-3.2L SOHC (6VD1) (1997)
2. Cover. Install cover remover to center hole of cover. Use slide hammer to remove cover.
-
Cover remover: J-41096
-
Adapter: J-38584
-
Slide hammer: J-23907.
3. Spring.
4. Piston.
INSPECTION AND REPAIR
Visual Check. If any damage, deformation or wear is found in a return spring, piston or piston cover, replace
ASSEMBLE
1. Piston. Place the fitter into adaptor case and push the piston into position, using suitable diameter tube.
-
Piston fitter: J-38553.
2. Spring.