honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Drivetrain - Clicking Noise On Low Speed Turns|Page 5105 > < Drivetrain - Clicking Noise On Low Speed Turns|Page 5099
Page 1
background image

Constant Velocity Joint: All Technical Service Bulletins
Drivetrain - Clicking Noise On Low Speed Turns

91-029

January 26, 1999

Applies To: 
ALL 1988 and later Models*

Clicking Noise While Turning
(Supersedes 91-029, dated April 17, 1992)

Updated information is shown with asterisks and black bars.

SYMPTOM

A clicking noise is heard while making right or left turns at 10 mph or less.

PROBABLE CAUSE

Worn outboard driveshaft joint.

CORRECTIVE ACTION

Replace the noisy outboard driveshaft joint.

WARRANTY CLAIM INFORMATION

In warranty: The normal warranty applies.

Out of warranty: 
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your Zone Office. You
must request consideration, and get a decision, before starting work.

Defect code:

042

Contention code:

B07

Failed part:

Use the replacement Part Number

Skill level:

Repair Technician

PARTS INFORMATION

REQUIRED SPECIAL TOOLS

DIAGNOSIS

(Driving method)

1.

Drive the car in a circle in an open parking lot at approximately 10 mph with the brakes slightly applied.

Drivetrain - Clicking Noise On Low Speed Turns|Page 5105 > < Drivetrain - Clicking Noise On Low Speed Turns|Page 5099