Passport EX 2WD V6-3.2L SOHC (6VD1) (1997)
This will prevent poor contact and an open circuit.
9. Fix window glass assembly
^
Attach one bolt and screw shown in the figure
8. Window glass
^
Insert the window glass into position by tilting it as necessary, then set it against the channel of the window regulator.
Then, fully tighten the bolts and nuts of the window regulator.
^
Attach the window glass to the window regulator with the 2 screws.
7. Waterproof sheet
^
Place the butyl tape on the door panel so as not to cover the drain hole.